What are the step-by-step destination that the oil in lubrication system travels to in a car engine?

There all pretty similar. The oil sits in the oil pan. There is a dip tube with a strainer on the end which goes up to the oil pump. The pump sucks up the oil and pushes it into and through

What oil will we use for the lubrication of a new 4-stroke engine, engine oil or petrol?

Your new 4 stroke engine comes with either synthetic or standard motor oil that meets the manufacturer's specifications for that application. Using that oil should more than able to break-in the engine. The first oil change one should follow the O/E standards and just about all the synthetic oil of the proper viscosity should work. Many synthetic oil manufacturers

What are the best online resources to master AutoCAD?

Tutorials, forums, discussions.My personal favorite: AutoCAD Tutorials for free, 2010 2015 Lessons, VideosCAD tutor: http://www.cadtutor.net/tutorial...Youtube: AutoCAD Tutorials FullForums: AutoCADForums: CAD Forum - tips, tricks, utilities, discussionetc.

Can Tesla convert a Lamborghini to an electric one using the technology used in Tesla cars?

Yes, they absolutely can. They've already pulled it off with their "Roadster" albeit with a different car. They had to use Lotus Elise's shell and then integrate it with their powertrain. Read about it. It's an interesting story that gives us some insights about the struggles that creep up due to such reengineering.But will they? That's a

How to make my own car

Wow, this is a new question! Pal, what is your final objective?There could be two major implications : -Either you made it to explore the engineer in you, and make stuff out of junk, and keep it for show.You want to

How does a car work?

Firstly the major components of a car include valves ( there r different types of valve technologies ), piston, carburetors, fuel injectors, ignition systems, crank shaft, crank and connecting rods, cam shat and cam lobes, engine cooling systems, etc.There are basically two types of engines

Why does Tesla Motors use Catia V5 over Catia V6?

I can't speak to Tesla specifically, but it rarely makes sense to upgrade CAD packages immediately.  You want to let the bugs get fixed, but more importantly, you don't want to get ahead of your suppliers and other partners.  This is a

What is the role of lubricant in engine?

As others have said - it is used to prevent wear. In the journal bearing supporting the crank - it's the viscosity of the oil that allows hydrodynamic lubrication to occur - where the crank is fully supported by a layer of oil between it

Does running the AC in your car use additional fuel?

Short answer is yes, running the AC in your car does burn more gas most of the time but not always. At speeds under about 35 MPH or city traffic, your car will certainly consume more gas running the AC than

What is the most useful YouTube channel to learn AutoCAD?

Being a product designer, I had worked for more than 11 years as a cad designer & working with Autocad since more than 10 years.I have taught Autocad as a professional trainer as well in mnay companies, colleges.I am working as an

Can we use hydraulic oil in diesel engine as a lubricant?

No, you can not use hydraulic oil in diesel engine. The two main differences between hydraulic oil and engine oil are there viscosity and boiling point.Hydraulic brake require a fluid with low viscosity. While in case of IC engine comparatively highly viscous oil is required so that it can move properly

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

Which has better ROI, data science or mechanical engineering?

Depends on the field and application.Some DS, can have great returns, if plotted unto big data and co-relative data analytics in tandem with market fluxuations and corporate policying etc.As for Engineering..Well, Engineering needs a product and a label, so, that won't escape that department either..Which has the better ROI?Still, defined by subject, defined by market,

What are important tricks for mechanics?

Either it is your Engineering stream in Mechanics or for any other course, in order to score more marks, only thing that is required is completion of the syllabus and to be perfect in the syllabus of your academic course.Complete the syllabus with proper planning in

Is there any online source for learning SolidWorks Software?

As Pranjal Singh pointed out the best way to learn Solidworks is go through its in-built tutorials. I would just like to add few more things to it.1.) Join an online community: Where you can meet engineers from around the world with a single motive of honing your CAD skills,

Is it possible to combine electric motors (like multi-cylinder/rotor IC engines) in an electric vehicle's engine to generate more torque, and subsequently more power?

Yes, it's not only possible but dual motor electric motor vehicles have been on the market for years. For example, the Chevrolet Volt has two electric motors, a larger one used when there's a need for a burst of power and a smaller more efficient

What is the most useful YouTube channel to learn AutoCAD?

Being a product designer, I had worked for more than 11 years as a cad designer & working with Autocad since more than 10 years.I have taught Autocad as a professional trainer as well in mnay companies, colleges.I am working as an

Can we use hydraulic oil in diesel engine as a lubricant?

No, you can not use hydraulic oil in diesel engine. The two main differences between hydraulic oil and engine oil are there viscosity and boiling point.Hydraulic brake require a fluid with low viscosity. While in case of IC engine comparatively highly viscous oil is required so that it can move properly

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

Is there any online source for learning SolidWorks Software?

As Pranjal Singh pointed out the best way to learn Solidworks is go through its in-built tutorials. I would just like to add few more things to it.1.) Join an online community: Where you can meet engineers from around the world with a single motive of honing your CAD skills,

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

What are important tricks for mechanics?

Either it is your Engineering stream in Mechanics or for any other course, in order to score more marks, only thing that is required is completion of the syllabus and to be perfect in the syllabus of your academic course.Complete the syllabus with proper planning in

Can we use hydraulic oil in diesel engine as a lubricant?

No, you can not use hydraulic oil in diesel engine. The two main differences between hydraulic oil and engine oil are there viscosity and boiling point.Hydraulic brake require a fluid with low viscosity. While in case of IC engine comparatively highly viscous oil is required so that it can move properly

What are the components of a lubricating oil used in IC engines?

A lubricating oil with the necessary properties and characteristics will provide a film of proper thickness between the bearing surfaces under all conditions of operation, remain stable under changing temperature conditions, and not corrode the metal surfaces. If the lubricating oil is to meet these requirements, the engine operating temperature must NOT exceed a specified limit.

How does the BMW i8 electric engine work?

I have not looked up into the details for it as of yet but as of now through a few bits and pieces information I have read about it, in simple terms its a hybrid engine where you have both electric motor and an internal combustion engine

Is it possible to combine electric motors (like multi-cylinder/rotor IC engines) in an electric vehicle's engine to generate more torque, and subsequently more power?

Yes, it's not only possible but dual motor electric motor vehicles have been on the market for years. For example, the Chevrolet Volt has two electric motors, a larger one used when there's a need for a burst of power and a smaller more efficient

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

What is the most useful YouTube channel to learn AutoCAD?

Being a product designer, I had worked for more than 11 years as a cad designer & working with Autocad since more than 10 years.I have taught Autocad as a professional trainer as well in mnay companies, colleges.I am working as an

What is automotive engine oil?

Automotive oil is an oil used for lubrication of various internal combustion engines. The main function is to lubricate moving parts; it also cleans, inhibits corrosion, improves sealing, and cools the engine by carrying heat away from moving parts.We deal in variety of Automotive Oil namely :

What are the best study hacks for mechanical engineering student?

First be aware of the subjects in Mechanical Engineering

What is automotive engine oil?

Automotive oil is an oil used for lubrication of various internal combustion engines. The main function is to lubricate moving parts; it also cleans, inhibits corrosion, improves sealing, and cools the engine by carrying heat away from moving parts.We deal in variety of Automotive Oil namely :

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

Is it possible to combine electric motors (like multi-cylinder/rotor IC engines) in an electric vehicle's engine to generate more torque, and subsequently more power?

Yes, it's not only possible but dual motor electric motor vehicles have been on the market for years. For example, the Chevrolet Volt has two electric motors, a larger one used when there's a need for a burst of power and a smaller more efficient

Which has better ROI, data science or mechanical engineering?

Depends on the field and application.Some DS, can have great returns, if plotted unto big data and co-relative data analytics in tandem with market fluxuations and corporate policying etc.As for Engineering..Well, Engineering needs a product and a label, so, that won't escape that department either..Which has the better ROI?Still, defined by subject, defined by market,

What are important tricks for mechanics?

Either it is your Engineering stream in Mechanics or for any other course, in order to score more marks, only thing that is required is completion of the syllabus and to be perfect in the syllabus of your academic course.Complete the syllabus with proper planning in

What is the most useful YouTube channel to learn AutoCAD?

Being a product designer, I had worked for more than 11 years as a cad designer & working with Autocad since more than 10 years.I have taught Autocad as a professional trainer as well in mnay companies, colleges.I am working as an

Is there any online source for learning SolidWorks Software?

As Pranjal Singh pointed out the best way to learn Solidworks is go through its in-built tutorials. I would just like to add few more things to it.1.) Join an online community: Where you can meet engineers from around the world with a single motive of honing your CAD skills,

How does the BMW i8 electric engine work?

I have not looked up into the details for it as of yet but as of now through a few bits and pieces information I have read about it, in simple terms its a hybrid engine where you have both electric motor and an internal combustion engine

Which has better ROI, data science or mechanical engineering?

Depends on the field and application.Some DS, can have great returns, if plotted unto big data and co-relative data analytics in tandem with market fluxuations and corporate policying etc.As for Engineering..Well, Engineering needs a product and a label, so, that won't escape that department either..Which has the better ROI?Still, defined by subject, defined by market,

Can we use hydraulic oil in diesel engine as a lubricant?

No, you can not use hydraulic oil in diesel engine. The two main differences between hydraulic oil and engine oil are there viscosity and boiling point.Hydraulic brake require a fluid with low viscosity. While in case of IC engine comparatively highly viscous oil is required so that it can move properly

What are some hacks that can make my student life (mechanical engineering) easy?

I see people have written many answers which are quite helpful. I am also sharing my experience here for others to understand and excel. 1. Set your career goals during the first year of College:After graduating from college I took many exams only to realize

What causes space shuttles to blow up?

Actually, that's a common misconception. In truth, neither of NASA's two Shuttles that were destroyed

What is moment of force?

the moment of force means the turning or rotational effect produced by a force acting on a body witha fixed axis of rotation. it is also referred to as torque.moment of force is the product of the force being applied and the perpendicular distance of the line of action of the force from the axis of rotation.

Is reverse combustion possible?

You mean, can we construct a hydrocarbon molecule using only carbon dioxide and water, giving off oxygen as a byproduct? Plants do this every day. Photosynthesis.There are some research efforts ongoing on artificial photosynthesis:https://en.wikipedia.org/wiki/Ar...Combustion is exothermic and

What is a 4 cylinder car?

4 cylinders refers to the engine. An engine can have any number of cylinders. Most road cars have between 2 and 16 cylinders however more than 8 is really only supercars and exotics. The smallest modern economy cars have 3 cylindersMid sized family cars have

What are the components of a lubricating oil used in IC engines?

A lubricating oil with the necessary properties and characteristics will provide a film of proper thickness between the bearing surfaces under all conditions of operation, remain stable under changing temperature conditions, and not corrode the metal surfaces. If the lubricating oil is to meet these requirements, the engine operating temperature must NOT exceed a specified limit.